NormalOtis 2000 VF MRL

[drtesla]

Necesito ayuda para sustituir un inversor weg cfw09 por un cfw500, después de quema. Diagrama BAA21000D.

[adailton]

troca cfw 09 pelo cfw 500 manual

[Schindlerbrazil]

Ja temos essa modificação porem o software dedicado continua sendo otis

[Mikitutin]

Here i have some important information about Otis 2000 VF. You have to disable the REM, before it sends a fault to the controller. Otherwise the Lift will be locked down, and then you have to call Otis to unlock it. To reprogramm the REM you have to pull out the Cable from controller and connect it directly to the phone line, then it is unlocked to reprogramming.

[Mikitutin]

Also, you have to be very carefully with the Wormdrive. The Wormdrive Tracgtion Motor must be maintained very well, it is not allowed to make loud noises, because that means it is not oiled enough. This will cause big damages which happens very often

[Mikitutin]

If the OFV 20 does have CAN Problems, always check the Connection Cable. It is grey and looks like a Serial Cable. It needs often to be replaced.

[Luisrojas1811pantec]

[maar]

Ya no hay el enlace de descarga